Current Location:Home> Products > Butterfly valve > GRW/GRL butterfly valve GRW/GRL butterfly valve
Features:
Wafer and lugged body design with face-to-face dimension, according to EN 558 Series 20 and API 609.
Designed according to EN 593 and API 609.
The seat is field replaceable and fully isolates the body and shaft from the flow.
Primary shaft sealing exceeds the pressure rating of the valve and prevents leakage through shaft area to atmosphere.
A secondary shaft sealing provides back-up safety.
A molded-in O-ring in the seat for flange sealing eliminates the need for gaskets.
Shaft seals prevent moisture penetrating into the shaft area.
The two piece shaft allows for a thin disc and provides minimal obstruction to flow (up to DN 300/ NPS 12).
Rounded polished disc edge gives full concentric sealing, lower torques, longer seat life and drop-tight shut-off.
Body locating holes allow ease of installation and centering between the flanges.
Extended body neck allows for pipe insulation.
Top and bottom shaft bearings for optimized support and minimum friction and decreased torque.
Specifications:
Certifications ABS, CRN, CUTR, PED, SIL capable
End Connection Lugged, Wafer
Application Air Circulation, Balance of Plant, Bulk Storage, Bulk Conversion Other, Compressors , Conveyors, Cooling Water , Cruise Ship, Facilities & Process Utilities, Blowers
Material Ductile Iron, Duplex, Epdm Rubber, Monel, Nylon, Super Duplex, 316L Stainless Steel, 316 Stainless Steel, 304 Stainless Steel, Buna-N, Aluminum Bronze
Operating Temperature Less than 150 C
Pressure Class PN, ASME
Process Connection Type 150RF, PN16
Seat/Seal Type Resilient
Shutoff Class Zero Leakage
Standards API 609, ASME B16.34
Valve Size NPS 18 / DN 450, NPS 20 / DN 500, NPS 2-1/2 / DN 65, NPS 24 / DN 600, NPS 3 / DN 80, NPS 14 / DN 350, NPS 12 / DN 300, NPS 6 / DN 150, NPS 8 / DN 200, NPS 16 / DN 400, NPS 4 / DN 100, NPS 10 / DN 250
Valve Size Standard DN, NPS
Valve Type Butterfly
Media Vacuum, Water, Air, Fuel Oil, Hot Water, Liquids
Stem O-ring