Current Location:Home> Products > Butterfly valve > Lined valve Lined valve
Features:
Upper and lower set of Belleville springs put pressure to keep the two sealing surfaces of the stem seal together resulting in a superior TA-Luft / VDI 2440 approved. tem seal.
The elastomer back-up pads behind the liner ensure a tight fit around the disc, for a bubble tight shut-off.
The liner provides a wide flange sealing surface.
A one piece thin disc stem lined with 3 mm molded PFA providing high Kv values.
The liner and disc are the only two valve parts in contact with the medium.
Primary shaft sealing by preloaded contact between disc and liner hub.
Secondary shaft seal by oversizing the shaft diameter in relation to the shaft hole in the liner.
The liner and disc are molded and machined to close tolerances to provide:
Vacuum tests with helium with pressures less than 20 Pa absolute (0.2 mbarA).
Optional TFM lining available for extremely demanding applications.
Integral body locating holes to ensure perfect centering of the valve.
Actuator flange and stem dimensions acc. ISO 5211.
Specifications:
Certifications PED, Fugitive Emission, CUTR, CRN, CE
End Connection Lugged, Wafer
Body Design Short Pattern
Material Ductile Iron
Operating Temperature Less Than 200 C
Pressure Class PN
Seat/Seal Type Lined
Valve Size Standard DN
Media Aggressive Liquids/Gases